Changelog

Version 7.0.5

  • Do not split dual-channel RGB+WW fixtures (color / white brightness zones); keep RGBCW strips, flushmounts, and similar devices as one light with shared color controls

  • Prefer primary brightness for dual-channel lights and send dimming PUTs via DimmingFeature.func_instance

  • Route RGB/white/CCT brightness PUTs to the color or white channel on dual-channel fixtures; track per-channel levels on the light model for integrations (Hubspace-Homeassistant #160)

  • Detect dual-channel fixtures from function/capability definitions, not only live state values

  • Merge polled device states into cache so partial poll responses do not drop dual-channel metadata

  • Add Light.is_dual_channel and Light.channel_brightness() for downstream integrations

  • Remove LCN3002LM-01 WH-specific split routing; main/trim and other true multi-zone lights still split normally

  • Fix AferoDevice list fields to use default_factory=list instead of default=list

Version 7.0.4

  • Re-send color-mode: white when setting white on no-CCT split-light zones, even if the cached mode is already white

Version 7.0.3

  • Fix an issue where lastUpdateTime was not being set correctly

Version 7.0.2

  • Fix split-light polling to query parent metadevice ids once instead of synthetic split ids

  • Cache split light clones separately so parent state is not overwritten

  • Ignore other instances’ power states when applying inbound updates to split lights

  • Merge partial API state responses into cached device state instead of replacing it

  • Use instance-scoped color_modes on split lights so capability flags match each zone

  • Route white-only control on white-only zones through color-mode: white

  • Ignore inbound color-temperature updates for lights that have no CCT function

Version 7.0.1

  • Fix an issue for split lights

Version 7.0.0

  • Break: AferoBridgeV1.fetch_data has been replaced with AferoBridgeV1.fetch_discovery_data

  • Implement AferoBridgeV1.fetch_all_device_states that queries all known device states

  • Reduce the total bandwidth during polling by querying only device state

Version 6.2.0

  • Lights now split on a more generic model vs one based on model

Version 6.1.2

  • Switch light speed from select to number

Version 6.1.1

  • Fix issue where speed could not be adjusted for lights

Version 6.1.0

  • Add speed control for lights

Version 6.0.1

  • Fix an issue where DeviceController would reuse existing devices if it was within the same memory space.

Version 6.0.0

  • Enable the bridge to request fahrenheit and celsius

Version 5.6.1

  • Fix an issue where async_block_until_done stated all tasks were done when they were not

Version 5.6.0

  • Enable OTP login workflow

Version 5.5.0

  • Add support for air swing on portable ACs

Version 5.4.1

  • Revert hvac_mixin as it caused downstream issues

Version 5.4.0

  • Fix security sensors not tracking

  • Ensure binary_sensors are correctly updated

  • Better handling for security sensors

  • Set models for sensors

  • Add security-system-keypad support

Version 5.3.0

  • Device states are set from the API response rather than the sent states

Version 5.2.3

  • Fix an issue where the Security Sensor name was not being used

  • Fix an issue where Security Sensors would reference the incorrect key during an update

Version 5.2.2

  • Fix an issue where auth would not retry on failure

Version 5.2.1

  • Fix an issue where checking refresh token could cause an AttributeError

Version 5.2.0

  • Enable version polling once every 6 hours

Version 5.1.1

  • Fix an issue where switches would not send the correct ID during a change

Version 5.1.0

  • Add support for white LEDs

Version 5.0.0

  • BREAK: Exhaust Fan device split

  • BREAK: Portable AC switch split

  • Lights can now create switches for ‘toggles’

  • Convert to ruff from black

Version 4.2.0

  • Add support for Light LCN3002LM-01 WH

Version 4.1.1

  • Fix an issue where split devices would not send the correct ID to Afero

  • Fix an issue where siren-action was not sent when adjusting alarm state

Version 4.1.0

  • Add support for Security Systems

  • Add a callback when setting device states

Version 4.0.1

  • Fix an issue where DeviceController did not receive split devices

Version 4.0.0

  • API BREAK: Update DeviceController to receive raw polled data so it can accurately

    determine parent devices with split devices

  • Implement the ability for a device to split into multiple devices

    for easier control

  • Implement the ability to have a callback when setting states so

    split devices can properly update

  • Implement the ability for numbers to have a custom display name rather than

    the aggregate name

Version 3.3.5

  • Fix an issue where auth could produce a UHE

Version 3.3.4

  • Fix an issue in thermostats where they incorrectly stated support for auto

Version 3.3.3

  • Fix an issue in thermostats where the target_temperature could cause a UHE

Version 3.3.2

  • Fix an issue in thermostats where the target_temperature always returned celsius

Version 3.3.1

  • Enable switch for Portable AC

  • Fix an issue where setting temps did not follow the step

  • Fix an issue where portable AC’s timer did not turn it on

Version 3.3.0

  • Add Portable AC device class

Version 3.2.2

  • Solidify bridge API so Home Assistant tests do not call any private methods

Version 3.2.1

  • Fix a regression around battery sensor not showing

Version 3.2.0

  • Fully implement exhaust fans

Version 3.1.1

  • Add a secret that was missing

Version 3.1.0

  • Hide secrets in logs by default

Version 3.0.2

  • Fix an issue where thermostats would set the incorrect target temperature if the mode changed at the same time

Version 3.0.1

  • Fix an issue where thermostats would state invalid modes

Version 3.0.0

  • API Break: Binary Sensors / Sensors may no longer be included under the Device Resource

  • Binary Sensors / Sensors are now included with the most logical parent

Version 2.0.1

  • Add support for thermostats

Version 2.0.1

  • Add support for determining if “white” is a supported option for lights

Version 2.0.0

  • Migration from aiohubspace to aioafero to support the Aefro IoT Cloud

Version 1.2.0

  • Enable auth to reuse a previously generated token

Version 1.1.3

  • Fix an issue where devices could be properly identified

Version 1.1.2

  • Fix an issue where water valves were showing as fans

Version 1.1.1

  • Fix an issue where 500’s could stop polling

Version 1.1.0

  • Added an event type for invalid auth during token refresh

  • Added a check to ensure the token is valid during refresh time. If invalid, the event invalid_auth is emitted.

Version 1.0.4

  • Add additional logging around issues when querying Hubspace API

Version 1.0.3

  • Fixed an issue where a new device could be generated prior to an element

Version 1.0.2

  • Fixed an issue where an updated sensor could use an incorrect value

Version 1.0.1

  • Fixed an issue where passwords could be logged to debug logs

Version 1.0.0

  • Solidify API

  • Fix an issue where the loop would break during collection

  • Increase code coverage

Version 0.7.0

  • Add support for glass-doors

Version 0.6.4

  • Fix an issue where locks were not being managed by LockController

  • Fix an issue with Fans not correctly setting presets

  • Less greedy updates - Only forward updates if something has changed on the resource

  • Create additional unit tests to ensure functionality

Version 0.6.3

  • Fix an issue with Binary sensors to ensure the state is obvious

Version 0.6.2

  • Fix an issue with fan’s preset not correctly identifying its state

Version 0.6.1

  • Fix an issue with binary sensors to ensure they return True / False

Version 0.6.0

  • Add the ability to send raw states to Hubspace and have the tracked device update

Version 0.5.1

  • Fixed an issue where the account ID would not be set during a partial initialization

Version 0.5.0

  • Only emit updates to subscribers if values have changed

  • Fixed an issue where the logger was always in debug

Version 0.4.1

  • Adjusted logic for how HubspaceDevice modified models

  • Fixed an issue around Device initialization

Version 0.4.0

  • Added tracking for BLE and MAC addresses

  • Added binary sensors

Version 0.3.7

  • Fixed an issue around subscribers with deletion

Version 0.3.6

  • Fixed an issue around switches not properly subscribing to updates

  • Fixed an issue where Hubspace could return a session reauth token when preparing a new session

  • Added models for HPSA11CWB and HPDA110NWBP

Version 0.3.0

  • Fixed an issue around subscribers with deletion

Version 0.2

  • Added support for Binary Sensors

  • Fixed an issue where a dimmer switch could not be dimmed

Version 0.2

  • Added support for Sensors

Version 0.1

  • Initial implementation

  • Rename from hubspace_async to aiohubspace

  • Utilize the concept of a bridge instead of raw connection